top of page
quooker_flex_black.png.webp
Service
What is involved in a service?

The main objective for a service is to get your Quooker system working back to it’s best. We will disconnect and remove your system to fully clean all the internals. Whilst apart we would advise the internal hi-tac filter is replaced. This is an internal carbon based filter used to remove chlorine and improve taste. An inspection of all other parts will be carried out and we will advise if any additional parts are required. Once rebuilt we reconnect your system to your plumbing system, checking for any leaks and test/flush the system through thoroughly. 

The damaging effects of hard water and limescale can prove to be costly, reducing the lifespan of many appliances around the home. Boilers, washing machines, dishwashers and even your boiling water taps will eventually succumb to poor water quality.

01

First we disconnect the mains water and power from the tank and remove all the hot water inside.

quooker pro3 disconnect

The picture below shows the amount of limescale removed from the inside the Quooker Pro3 tank

IMG_6634.jpeg

02

Disconnect all wires and remove all the nuts holding to top of the tank

quooker pro3

The heating element was very bad with limescale and was the mai reason the lights was flashing on the tap.

IMG_4295.jpeg

03

The pictures below are from a Pro3 and was installed two years ago in Clapham and that's how it looked

quooker limescale

The tank itself was particularly bad on inside walls and at the top as you can see on the picture.

IMG_4298.jpeg
bottom of page